Set of 1 BDSM collar and 2 BDSM bracelets - Heaven's Hell 10mm stainless steel EXTRA STRONG - lockable and with two keys
The BDSM bands from the Heaven's Hell series are our classic stainless steel restraints. All straps are individually handcrafted and adjusted according to your dimensions. Equipped with a hinge in the back and a visible lock at the front. The stainless steel shackles can be supplemented with an O-ring. This is attached to a removable stainless steel holder.
The effect of our stainless steel bands can be felt simply by the weight of the material. Thanks to the precise craftsmanship, they also fit perfectly and are therefore suitable for longer periods of wear. Guaranteed captivating hours, no matter which end of the chain you are at.
Please note: The 50mm x 10mm collar is only for advanced users. It is extremely heavy and not suitable for carrying for too long. If the bands are ordered without a ring, the ring cannot be attached later without us leaving the opening for it!
|
material |
stainless steel |
|
Strength |
10mm |
|
Height |
30mm, 40mm, 50mm |
|
surface |
matt, polished |
|
Lock |
silver-colored, gold-colored |
|
O-ring |
optional |
Dimension guide
In order to create the stainless steel strips precisely, we need your individual and exact dimensions. For the measurement it makes sense to have two people. Please proceed as follows and enter the dimensions in centimeters and millimeters (cm,mm) in the field provided in the order listed below (1) /2) /3) - or A) /B) / C) ) at:
collar
1) SCOPE
Measure the neck circumference using a flexible tape measure. Keep your head straight while measuring and place the measuring tape at the level of the larynx. Please note this circumference value under 1).
2) DIAMETER WIDTH
For this you will need two hardcover books. Hold these with the spines of the books at the sides of your neck. Make sure that the books only touch the skin of the neck, but do not press it. Both books just need to be aligned parallel to each other. Now use a ruler to measure the distance between the two spines of the book and note the value under 2).
3) DIAMETER DEPTH
For this you will need two hardcover books. You hold these with their spines against your neck, both at the front and at the back. Make sure that the books only touch the neck, but do not dent it. It is important that the books are at the same height, namely at the thickest part of the neck (larynx). Both books must also be aligned parallel to each other again. Now measure the distance between the two spines of the book using a ruler and note the value under 3).
bracelet
A) SCOPE
Measure the circumference of your wrist using a flexible tape measure (if you don't have one, use a string). To do this, place the tape measure smoothly on your arm directly behind the wrist bone without constricting. Read the circumference in cm and mm and enter the value under A).
B) WIDTH
Measure the width of your wrist using two books with a solid spine. The measurement also takes place directly behind the wrist bone. To do this, place your forearm and hand flat and guide the two books from the left and right with the spines of the books on both sides of your arms so that the spines of the books touch the arm but do not press it in. Align the two book spines parallel to each other and now use a ruler to measure the width of your forearm by measuring the gap between the book spines. Specify this value under B).
C) HEIGHT
To determine the height of your wrist, place your forearm upright so that the edge of your hand rests on the surface. Bring two books with stiff spines to the top and bottom of your arms so that the spines touch the skin but do not press it. Align the two book spines parallel to each other and use a ruler to measure the width of your forearm by measuring the gap between the book spines. Please specify this value under C).
