Heaven's Hell set of 2 - EXTRA STRONG - ankle bands

Set of 2 ankle straps with optional O-ring - Heaven's Hell 10mm stainless steel EXTRA STRONG - lockable and with two keys

The BDSM ankle bracelets from the Heaven's Hell series are one of our classic stainless steel restraints. All straps are individually handcrafted from stainless steel and adjusted according to your dimensions. Equipped with a hinge in the back and a visible lock at the front. The foot straps can be supplemented with an O-ring. This is attached to a removable stainless steel holder.

The effect of our stainless steel ankle straps can be felt simply by the weight of the material. Thanks to the precise craftsmanship, they also fit perfectly and are therefore suitable for longer periods of wear. Guaranteed captivating hours, no matter which end of the chain you are at.

Please note: The pictures currently show the 6mm version. If the bands are ordered without a ring, it cannot be attached later without us leaving the opening for it later!

Dimension guide

In order to create the stainless steel straps precisely, we need your individual and exact fetlock joint dimensions. For the measurement it makes sense to have two people. Please proceed as follows and enter the measurements in centimeters and millimeters (cm, mm) in the field provided in the order mentioned below (I) / II) / III) ):

Ankle band

I) SCOPE

Measure the ankle circumference using a flexible tape measure. To do this, place the measuring tape smoothly on the leg directly above the ankle joint. From there, guide the band completely around the leg. Please note this circumference value under I).

II) WIDTH

You measure the width of the ankle bracelet using two books with a solid spine. Bring the two spines of the book to both sides of the leg (left and right) so that the spine of the book touches the skin of the leg, but does not press it. Align the two spines parallel to each other and now use a ruler to measure the width of your leg by measuring the gap between the spines. Alternatively, use a caliper. Please note this value under II).

III) DEPTH

To determine the depth of the ankle bracelet, place your foot on the floor. Bring two books with stiff spines to the front and back of the leg so that the spines touch the skin but do not press it. Align the two spines parallel to each other and use a ruler to measure the depth of your leg by measuring the gap between the spines. Alternatively, use a caliper. Please indicate this value under III).