Collar with open segments - 10 mm stainless steel EXTRA STRONG - lockable and optionally with O-ring
The BDSM collar with open segments is very similar to the Heaven's Hell series, but has been made even more elegant and lightweight with cutouts. All collars are individually handcrafted and adjusted according to your dimensions. Equipped with a hinge in the back and a visible lock at the front. The collar can be supplemented with an O-ring. This is attached to a removable stainless steel holder.
The effect of our stainless steel collars can be felt simply by the weight of the material. Thanks to the precise craftsmanship, they also fit perfectly. Guaranteed captivating hours, no matter which end of the chain you are at.
Please note: The 50mm x 10mm collar is only for advanced users. It is extremely heavy and wearing it for long periods of time is very stressful. If the collar is ordered without a ring, it cannot be attached later without us leaving the opening for it first!
|
material |
stainless steel |
|
Strength |
10mm |
|
Height |
30mm, 40mm, 50mm |
|
surface |
matt, polished |
|
Lock |
gold-colored, silver-colored |
Dimension guide
In order to create the stainless steel strips precisely, we need your individual and exact dimensions. For the measurement it makes sense to have two people. Please proceed as follows and enter the measurements in centimeters and millimeters (cm, mm) in the field provided in the order mentioned below (1) / 2) / 3) ):
collar
1) SCOPE
Measure the neck circumference using a flexible tape measure. Keep your head straight while measuring and place the tape measure at the level of the larynx. Please note this circumference value under 1).
2) DIAMETER WIDTH
For this you will need two hardcover books. Hold these with the spines of the books at the sides of your neck. Make sure that the books only touch the skin of the neck, but do not press it. Both books must be aligned parallel to each other. Now use a ruler to measure the distance between the two spines of the book. Alternatively, use a caliper. Write down the value under 2).
3) DIAMETER DEPTH
For this you will need two hardcover books. You hold these with their spines against your neck, both at the front and at the back. Make sure that the books only touch the neck, but do not dent it. It is important that the books are at the same height, namely at the thickest part of the neck (larynx). Both books must also be aligned parallel to each other again. Now use a ruler to measure the distance between the two spines of the book. Alternatively, use a caliper. Write down the value under 3).
